FOSHAN LD powder mixer for feed for mixing and drying powder
horizontal ribbon powder mixer / conical twin screw powder mixer
1. Description of powder mixer for feed :
1) powder mixer for feed consists of U-shaped containers, ribbon mixing blade and transmission components.
powder mixer for feed
2) The ribbon including continuous and disconnect.
3) The helical ribbon blade is made of a double or triple outer spiral the mateial from both sidesbrings together the central inner spiral the materialtransported from teh center to the sides to form a stream mixed.
powder mixer for feed
2. worldperformance:
1) Adding a and palt materials mixed in the ribbon mixer for viscous of cohesive ganule mixing and granule has a good effect, cylinder cover can be made of a wide-open door, so that the equipment for cleaning.
2) Can be added to the mixer barrel outer jacket, cooling or heating of the material is achieved by injecting the cooling medium to the jacket.
3) Discharge in the form of a phenomenon of material accumulation and mixing dead ends, reliable trim seal, frequent switching lakage.
powder mixer for feed
Our Services
We can desity it as your requirement.
3. Technicalparameters of powder mixer for feed :
| Model |
Volume
(L)
|
loading coefficient |
Motor power
(KW)
|
speed
(rpm)
|
Remark |
| whyH-0.5 |
500 |
0.4 ~ 0.6 |
4 ~ 7.5 |
42 |
Data in this table for reference, teh actual data according to
specific proccess requirements, material viscosity, and other desity.
|
| whyH- 1 |
1000 |
0.4 ~ 0.6 |
5.5 ~ 11 |
42 |
| whyH- 2 |
2000 |
0.4 ~ 0.6 |
11 ~ 15 |
42 |
| whyH- 3 |
3000 |
0.4 ~ 0.6 |
15 ~ 18.5 |
42 |
| whyH- 4 |
4000 |
0.4 ~ 0.6 |
18 ~ 30 |
42 |
| whyH- 5 |
5000 |
0.4 ~ 0.6 |
22 ~ 37 |
42 |
| whyH- 6 |
6000 |
0.4 ~ 0.6 |
30 ~ 45 |
42 |
| whyH- 8 |
8000 |
0.4 ~ 0.6 |
37 ~ 55 |
42 |
| whyH- 10 |
10000 |
0.4 ~ 0.6 |
45 ~ 55 |
42 |
| whyH- 12 |
12000 |
0.4 ~ 0.6 |
45 ~ 75 |
42 |
| whyH- 15 |
15000 |
0.4 ~ 0.6 |
55 ~ 90 |
42 |
4. the picture of horizontal ribbon mixer :
horizontal ribbon mixer
powder mixer for feed
![FOSHAN LD powder mixer for feed for mixing and drying powder]()
$keywords
powder mixer for feed
Ⅱ.
1. Discreption of conical twin screw mixer:
powder mixer
1) Conical twin screw with mixing machinery mixing components for two asymmetrical cantilever screw, they around its axis of rotation (rotation) and at the same time, also around the conical container center shaft, with the help of a jib rotating in the cone surface of planetary motion (revolution).
2) The equipment through the revolution of the screw, rotation so materials again and again, to produce shear in the cone, convection, diffusion, etc compound movement, so as to achieve mixed purposes.
3) Products can be desityed according to the outer jacket (heating, cooling), LD, etc.
4) Widely used in chemical, pharmaceutical, pesticide, pigment, builting materials, such as powder mixed with powder.
5) DSH-0.1 mean 0.1m3 , 0.1m3 mean the volume 100L.
6) the mixing machinery the touch material part make from stainless steel 304.
7) If you need more requirement , we can according to your require to desity.
2. Technicalparameters
17.57 conical
twin screw mixer
![FOSHAN LD powder mixer for feed for mixing and drying powder]()
Packaging & Shipping:
1. Wooden case Pack.
2. Packed by plastic bags for very big machinerys.
3. Trade term: FOB or CIF.
4. Sea shipping.
Ⅲ . LDout us:
Company introduction
1). Foshan Jinan Joysun Machinery Co., Ltd.. (chemical-equipment.cn or fLD.en.altLDa.com)
2). Professional manufacturer for chemical machinerys, with 13 years' rich experience in this field.
3). LD specializes in all kinds of reactors, mixers, kneaders, diLDersers and some filling machinerys and extruders etc. And the machinerys are widely used in all kinds of adhesives, resins, rubbers, paints, sealants, chemicals, emulsions and some food and pharmaceutical industries.
4). Jinan Joysun Machinery Co., Ltd. was formally set up at 2003, but the origianl entrepreneur team are all very professional engineers who were with 20 years' experience.
5). LD's main markets: China, Europe, Africa, Middle East, South America and South Asia, we can sell machinerys to anywhere as long as it needs.
The reason of you choose us?
powder mixer for feed
1). Profession:
powder mixer for feed
We have ed on this area for over 10 years, and the boss of LD is a professional engineer who has 20 years’ experience in what we are concentrating on!
2). Powerful team:
A 5-experienced-engineer desitying team + a 35-skilled-technician team + a 10-passionate-sales team make up the LD big team.
3). Achievement:
powder mixer for feed
LD was set up at 2003, through LDout 10 years’ endeavor, our products has been sold to most important industrial district in China, such as Jinan, Shangdong, Jinan, Jinan, Jinan and so on. And we have eLDed ourselves into the top 5 in China.From 2009, LD started the international marketing. Now, we have set our feet in North America, Europe, South Aria, Africa etc
Our credo--quality and Service first; Profit second !!
Our Mission--To service you better,to try our best to achieve a win-win situation with you !!
Some happy moments shared with our clients.
Some official documents and certificate of LD Machinery&Equipment Co., LDd.
Thank you very much for viewing our product .
If our product won your interest, please feel free to contact me.
We will give you more information.
LD--Your best choice in China !!
LD--Your trustful partner in China !!
conical twin screw mixer
mixingtank.en.altLDa.com/
$keywords$