Food Equipment Manufacturer food equipment manufacturer
Product Description 
Food Equipment Manufacturer food equipment manufacturer is injected into a small amount of process water, to the expected position (not soak products) through efficient circulation pump - fiLDer - high efficiency heat exchanger will be injected into the water LD pipe, and then by ejecting atomizing LD nozzle will hot water to the surface of food, uniform distribution of internal heat, pan unsterile blind Angle.Water through the heat exchanger for heating and cooling, heating and cooling speed is rapid, can effective sterilization, comprehensive, stability of product.Especially suitable for glass products and drinks beverage sterilization.
Water bath LLDe sterilization pot can be divided into: double bath LLDe sterilization pot, double parallel water bath pot LLDe sterilization pot, three parallel water bath pot LLDe sterilization pot.
Characteristic
1, Indirect heating indirect cooling, cooling water and process water contact, avoid the secondary pollution of the food, not used for water treatment chemicals.High temperature short time sterilization.
2, Reduce steam consumption, steam atomized water sterilization after mixed directly inside the autoclave, increase temperature and cooling speed.
3, Low noise, create quiet and comfortable worldenvironment.
4, Water injection from different angles, steam, air and water mixed convection, forming a perfect temperature distribution.
5, A small amount of process water cycle fast, fast to the expected temperature sterilization.
6, Kettle temperature sensing probe is equipped with four ile, may at any time to monitor food center F value, the heat distribution inside the kettle, LDout heat penetration (from food surface temperature time of arrival in food geometric center).
7, Perfect pressure control, pressure in the entire production process adjustment, to adapt to the product packaging the change of the internal pressure, make the product packaging to meet minimum deformation degree, especially suitable for gas packaging products.
8, Process water preheating system can ensure that product insulation, filling is continuous heating process.
9, And the sterilizing water softening water to avoid water water quality problem for the outerpackdamage without dirt.
10, Steam sterilization function
11, Save installation space, convenient operation, saves the manpower by direct operation control cmachineryt.
12,Heating and cooling can be divided into many stage, especially suitable for glass bottle.
worldprinciple chart
Parameter
| diameter(mm) |
length (mm) |
volume(m³) |
body Thickness(mm) |
water pump |
| model |
quantity |
| Sterilizer pot |
hot water pot |
| φ900 |
1800 |
1.37 |
4 |
4 |
DN65 |
3 |
| φ1000 |
2200 |
2.03 |
4 |
4 |
DN65 |
3 |
| 2400 |
2.18 |
4 |
4 |
DN80 |
3 |
| 2600 |
2.34 |
4 |
4 |
DN80 |
3 |
| 3000 |
2.66 |
4 |
4 |
DN80 |
3 |
| φ1200 |
2700 |
3.56 |
5 |
5 |
DN80 |
3 |
| 3000 |
3.9 |
5 |
5 |
DN80 |
3 |
| 3600 |
4.58 |
5 |
5 |
DN100 |
3 |
| 4000 |
5.03 |
5 |
5 |
DN100 |
3 |
| φ1300 |
3000 |
4.62 |
5 |
5 |
DN100 |
3 |
| 4000 |
5.95 |
5 |
5 |
DN100 |
3 |
| 5000 |
7.27 |
5 |
5 |
DN100 |
3 |
| φ1500 |
4000 |
8.04 |
6 |
6 |
DN125 |
3 |
| 5000 |
9.8 |
6 |
6 |
DN125 |
3 |
| 6000 |
11.58 |
6 |
6 |
DN125 |
3 |
| Desity pressure |
0.35 Mpa |
| Maximum worldpressure |
0.30 Mpa |
| The material of pot body |
Sus304 |
| Desity temperature |
145°C
|
![Food Equipment Manufacturer food equipment manufacturer]()
Product UsesThe application scope of the food retort
1. Glass container: glass bottle, ceramic bottles
2. Mental container: tin can
3. Plastic container: PP bottle, HLDE bottle
4. Soft package: aluminum foil bag, high temperature Cook bag
5. Gas-Pack boxes
Factory
We are retort sterilizer manufacture since 2002.14 years experience enable us to provide you our best quality machinery and serivce.
More than 50 Skilled workers in our plant, R&D center, full equiped food sterilization lLD are available for our client.
Our retort sterilizers have been approved by CE, and FDA low acid food sterilization approval, as well as ASME.
Different size we can customized manufacture for our client as per their different needs.
![]()
Certificate
Packaging & ShippingWe will ver your goods by LDL/20'FCL/40'FCL depending on your order.
Before very, our professional technician will do trial run for each product to check until everything is functional, you also can come to our factory and test our machinery together with us.
When loading, our workers will fix the retorts tightly with wire rope so that the retorts can't move in the container
FAQ1. Are you manufacture or trading company?
A: We are manufacture; our factory is located in LD.
2. What is max diameter we can do for you?
The maximum diameter which our company can make is 4.5m. And the length is up to your requirements.
3. How much Capacity can you treat per tank at a time?
It is up to the diameter and length of the equipment desityed by your demands.
4. Is the control system manual, semi-automatic or full-automatic?
Our control system is full-automatic operation system.
5. Can we install the equipment by ourselves?
Of course, we will provide you with detailed installation information.
Contact us
If you cannt find suitable from this page ,you can know more product from this
![Food Equipment Manufacturer food equipment manufacturer]()