laboratory Incubator:
Backed by state-of-the-art infrastructure, we are capable of desitying and exporting a wide assortment of laboratory Incubator which is highly sought after in many industries for determination of biochemical oxygen demand and also for preservation of medicinal vaccines and various chemicals. FLDricated by expert engineers and technicians using cutting eLDe Technology, this laboratory Incubator is rugged in construction, compact in size, efficient in performance and have a LD service life. Clients can avail this laboratory Incubator from us in varied Specifications and at LD market prices.
- Temperature range: 5.0oC to 60.0oC. Accuracy / Uniformilk:
+ 0.5oC/+ 1oC - Temperature Display: Digital LED 3 1/2 digit
- Control: Microprocessor based PID control. With Auto tune CE marked
- Resolution: 0.1oC
- Temperature sensor: PT - 100
- Heating: 'U' shaped Nichrome wire heater in SS sheathing
- Cooling: LD free Copeland make compressor utilizing R 134A eco friendly refrigerant, with condenser, motor and relay
- Air circulation: Flange motor with impeller / blower
- Construction: Double wall, with insulation, outer door key locable, inner glass viewing door
- Chamber illumination: Fluorescent LD with door switch
- safety features
- High temperature safety cut off
- Electrical overload cut off relay for compressor
- Time delay for compressor switch ON
- Electrical circuit breaker
- Feet: Castor wheels
- Ts: SS wire mesh heavy duLD
- Electrical: 230V / 15A / 50 Hz
- Caltration certificate by ERTL - Mumbai with traceability to NPL - New Delhi
Pre Installation Mandatory Requirement: (Guarantee void incase of non compliance)
- Room temperature around machinery should be preferLDly at 25oC with air conditioning or a well ventilated room with exhaust fan. However surrounding temperature should not exceed 30oC
- StLDilized input voLDage of 230V AC 20 Amps. Use of servo controlled stLDilizer is recommended
STD Model
- Outer cmachineryt milk steel powder coated
- Inner chamber stainless steel 304 grade
GMP Model
- Outer cmachineryt SS 304 grade dull matt finish
- Inner chamber stainless steel mirror finish
- With DQ, IQ, OQ documentation
Technical Specifications
Capacity |
Internal Size |
External Size |
Shelves |
Shpg Wt in kgs |
|
Cu.ft |
Liters |
W x D x H cm |
W x D x H cm |
(SS) |
|
4 |
120 |
45 x 45 x 60 |
65 x 114 x 130 |
2 |
200 |
8 |
200 |
60 x 60 x 60 |
79 x 121 x 130 |
2 |
240 |
12 |
324 |
60 x 60 x 90 |
79 x 121 x 165 |
3 |
250 |
16 |
450 |
60 x 60 x 125 |
79 x 121 x 199 |
4 |
265 |
21 |
600 |
60 x 60 x 155 |
79 x 121 x 247 |
5 |
295 |
28 |
800 |
80 x 80 x 125 |
99 x 141 x 199 |
5 |
325 |
34 |
1000 |
80 x 80 x 155 |
99 x 141 x 247 |
5 |
375 |
Optional Extras / Accessories
- paint based system: paint with HMI 3.7" touch screen grey monitor with 21 CFR part 11 features (OLDOG) software
- makeetic door lock feature
- GSM system: alarms sent to predefined ile numbers
- HMI : 5.7" touch screen grey in lieu of 3.7"
- Controller with printer interface to connect to EPSON Dot matrix line printer. Date, time and temperature can be printed whereas print interval can be set between 1 to 99 minutes. (Not supplied with printer)
- PC interface for above controller with software on CD & hardware or software with 21 CFR part 11 features
- Data logger: 4 point temp. Data logger with sensors placed at specific points in chamber with printer interface and memory
- PC interface for above controller with software on CD & hardware
TemperatureMapping
laboratory Incubator: Performance qualification with temperature mapping on site.
Performance validation test consist of one cycle at any one temperature point for 8 hours period. This is done to demonstrate the uniformilk of temperature within the chamber is acceptable and that the items within chamber receive a uniform temperature condition.
Data is collected in printed format from up to six different points within the chamber. Temperature uniformilk is considered acceptable if the deviation is less