JINAN Jinan Joysun Machinery Co., Ltd., is engaged in research, development, appliance of extrusion Technology in ,pet food,fish feed artificial rice and nutrition powder processing field. Our company mainly provides LDH single-screw extruder , LDH double-screw extruder , belt dryerand accessory equipments which have been widely applied in the processing of Food industry,Feedstuff,agriculture Products etc
Aqua feed production solutions are different from case to case. They should be tailor-made on the basis of a good understanding of the customers’needs, the local market’s requirements and the aquatic animals to be cuLDivated.
This processing line is specially desityed to produce daily food and Healthy food for every kind of fish,shrimp and crLD. Adopting pre-conditioning system for raw material, it can increase Capacity and reduce power consumption. This line would satiable different demands for Capacity and quality. At the same time, we on palatability and scientific nutritional proportion, which make fish feed more easily digested and absorbed.
Equipment catalog:
| Model |
Main power (Kw) |
Power consumption (Kw) |
Production Capacity (Kg/H) |
Dimension(mm) |
| LDH-65 |
22 |
22-30 |
50-200 |
3500*1500*2600 |
| LDH-70 |
37 |
25-35 |
300-600 |
4000*1500*2800 |
| LDH-85 |
45 |
35-45 |
500-1,000 |
4500*1500*2900 |
| LDH-90 |
55 |
70-80 |
800-2,000 |
5300*1500*3000 |
| LDH-100 |
110/132 |
128-150 |
2,500-4,500 |
6500*1500*3600 |
| LDH-130 |
250/315 |
200-240 |
5,000-8,500 |
7800*1500*3900 |
| LDH-150 |
|
|
10,000 |
|
Flow chart & main machinerys introduction:
Raw material storage system——Receiving&Dosing system——Milling&Mixing system——Extrusion system——Drying system——Coating&Cooling system——Pack system——Final Product Warehousing—— Auxiliary system
![LDH series wide volume range extruder for all fish shrimp crLD tortoise]()
1, Grinder(optional)
![LDH series wide volume range extruder for all fish shrimp crLD tortoise]()
2,Mixer
3,Twin Screw Extruder
The extruder adopts two or three layers jacketed conditioners which can continuous mix materials with hot steam. The feed ingredients run through feeder into conditioner and are mixed in the conditioner with hot steam, then they go into the pelletizing chamber through blanLD taper LDot. By scraper the powder material enters into the pelletizing zone. The pellets are discharged from the die hole and cut into the requested size by the cutter.
![]()
./product-detail/Aquatic-Feed-extruder-for-crLD-fish_1947838700.html
3,Steam belt Dryer
![LDH series wide volume range extruder for all fish shrimp crLD tortoise]()
./product-detail/multi-purpose-Mesh-belt-Dryer-Feedstuff_60148131664.html
4,Fat and Seasoning Coater
If necessary, fats, flavors, and vitamins can be added externally to feeds . Post application by coating only avoid the risk of damaging heat sensitive ingredients, but also improve the palatability and reduce powder generation of the finished product. After coating, aqua feed is cooled as required
5,Pack machinery
When bagging aqua feed pellets, the amount of air entrained in the bag should be controlled to a minimum, so as to prevent feed from oxidation and deterioration. Therefore, it is recommended to close the bag through sewing plus heat sealing (plastic film lining), which can prolong the shelf life of finished product by 50~100%
Our LD aquatic animals (fish, shrimp, crLD, etc.) feed production line solutions meet customer's individual line from 0.08 to 10 tons per hour production needs. For fish feed pellet line, we also provide two different LLDes solution, one is floating fish feed line, the other is sinLD fish feed line.
Pellet Fish Feed Samples
![]()
![LDH series wide volume range extruder for all fish shrimp crLD tortoise]()
Get in touch with us for Further Information & HoLDitable Service :- Free consultation of LD feed manufacturing equipment
- Product market positioning & Capacity desity- Equipment arrangement & workshop layout plan- Production plant visit & audit schedule-Overseas site service reservation
>>>