Hot air circulating paper drying machinery

Hot air circulating paper drying machinery

Production description paper drying machinery

Pictures of paper drying machinery

Features LDout Paper Drying machinery

1. Enerable saving&Environmental protection

Adopt close dehumidify+hot air circulating drying LLDe,saving operating cost;

Without waste gas and waste heat pollution,low noise

2. Running Stable,operating easily

paint+Touch Screen,running stable,operating easily;

Adopt paint control,can setting different drying curve,

Suitable for drying different materials.

3. Second waste heat recovery Technology(patent)

Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving Enerable more than 40%.

4. Exact control temperature and humidity

According to different material setting different drying curve,

the heat pump dryer can control the drying

chamber temperature between 20-80℃

5. Recovery volatilized component

Some kinds of material contain volatilized component,

In drying processing,hot and wet air will become condenser water then drain,

collect the condenser water so that collect volatilized component

Schemation Diagram

This is LDout the drying machinery worldprinciple .

LD heat pump dryer operates according to a basic reverse Carnot cycle. The worldfluid (refrigerant) at low pressure is vaporized in the evaporator by heat drawn from the dryer exhaust air. The compressor raises the enthalpy of the worldfluid of the heat pump and discharges it as superheated vapor at high-pressure. Heat is removed from the worldfluid is then throttled to the low-process line (using an expansion valve) and enters the evaporator to complete the cycle. In the dryer system,hot and dry air at the exit of condenser is allowed to pass through the drying chamber where it gains latent heat from the material. The humid air at dryer exit then passes through the evaporator where condensation of moisture occurs as the air goes below dew point temperature. Then drain the condenser water.

Parameters of the paper drying machinery

Product line

Our customers

Pack & loading container

A.LD can sure shipment within 7-25 worldLDs .

B.Strong plywood pallet , carton package for FCL full container loading, strong plywood box for LDL loading.

C.All LDare parts together loading into package ,one time finished shipment to buyer

E.Take pictures or video for buyer before package to 100% sure buyer get product same as the oder, no any

different.

Our Services

1. Pre-sale

Act as a good adviser and assistant of clients, enable them to get rich and generous returns on their investments.

1>. Select equipment model;

2>. Desity and manufacture products according to clients' special requirement;

3>. Train technical personnel for clients.

2. During the sale:

ReLDect clients, devote ourselves to improving the total value of clients.

1>. Pre-check and accept products ahead of very;

2>. Help clients to draft solving plans.

3. After-sale

Provide considerate services to minimize clients' worries.

1>. Assist clients to prepare for the first construction scheme;

2>. Install and debug the equipment;

3>. Train the first-line operators;

4>. Examine the equipment;

5>. Take initiative to eliminate the troubles rapidly;

6>. Provide perfect service;

7>. Provide technical exchanging.

Certification for our drying machinery