Product Description
moringa leaf drying machine / moringa leaf powder drying machine
2. industrial grade stainless steel
3. PLC control
4. keep original color and nutration
Features of Microwave moringa leaf drying sterilizer machine
1.Fast heating speed: directly heat on the internal and external of material at the same time, do not need to preheat. While there must be a preheating process in the traditional production
2. Heating evenly: microwave drying is completed through electromagnetic waves produced by magnetron.The internal and
external of material will be heated at the same time .
3. Less nutrition loss: material just stay in the microwave heating box for a short time, and do not need air and steam to
conduct heat, therefore can maximize keep nutrients in the material.
4. Sterilization and alcoholization:The microwave drying equipment also have sterilizing and alcoholizing function.
5. Reduce the labor intensity, improve work efficiency
6. Friendly environment equipment
7.PLC automatic control can realize the data storage, output, printing.
8.Using non-contact infrared temperature measurement technology, high precision, simple control.
9.Compliance with national GMP certification requirements.
Application of Microwave dryer sterilizer machine
- high moisture sticky materials;
- Powder, granule, sheet, plate, strip, such as pieces of small billet material drying;
- activation of catalyst regeneration;
- sludge of solid wastes, such as drying, sterilization and disinfection
- food, medicine, pharmaceutical raw materials of drying, sterilization and disinfection;
- Rice, flour, dry, insecticidal, mouldproof treatment;Polymer curing;Foaming material of heat treatment.
- agricultural products: red dates,beans,nuts, maize peanut, seeds ;tea,herbs, flowers, leaves ,Moringa
Advantage of Microwave dryer sterilizer machine
1.The machine set up separate total control cabinet, PLC programmable control, human-machine interface display.
In the heater outlet equipped with infrared radiation temperature measuring probe, measuring surface temperature of material, through the thermometer display material temperature in time, to monitor this case point temperature materials
in a timely manner, and can set any temperature, according to the required temperature, lower limit setting can automatically
adjust the heating tempe.
2.Microwave from the top heater feed into the mouth, heated material can be directly to microwave energy, the loss is smaller
than other factory, heating efficiency is about 15% higher, the material heating uniformity is more than 20% higher.
3.The core component of this equipment‘s main electronic components used in microwave generator with high quality, long life, high reliability and work continuously.
Technical parameters
Power supply |
380V±10% 50HZ±1% |
Microwave Output Frequency |
2450±50MHz |
Model |
GRT-25 |
Microwave output power |
20(Adjustable) |
Overall dimension(L*W*H) |
6000*1300*1660mm |
Transmission speed |
0.1~5m/min(adjustable) |
Microwave leak |
≤1 mW/cm2) |
Height of inlet and outlet |
60 mm |
transmission belt width |
650 mm |
Dehydration capacity |
30kg/h |
|
Accord with machinery safety mechanical and electrical equipment standard;GB microwave radiation health standard
| |
Microwave drying machine Working process diagram:
Control modes:
PLC control, man-machine interface operation, high automation degree.
The console is arranged in the feeding end equipment, using PLC and image monitoring technology(monitoring points: intermediate operating cavity), realized the visualization of the drying process. Withpreventing microwave leakage detection device can realize the automatic alarm function.
Power control:
Packet control microwave system, achieved a high degree of automation and humanization ideaindustrial microwave equipment according to set program automatic adjustment output microwaveintensity;
Temperature control:
Using the real-time temperature measuring precision in the drying process, according to the settemperature requirements, automatic regulated microwave field strength. Configure automatic smokesensing device, overheat burning , automatic shutdown. realized the process requirements andequipment self protection function;
Variable frequency speed regulation:
The transmission speed variable frequency adjustable, adjusted the best effect by combining thematerial properties and microwave intensity. Implanted into the automation program, realized theautomatic operation. Not only can improve the product quality, but also can save the manpower cost.
Workshop photo show
Our Services
1.Equipment warranty period of one year, in addition to human factors failure one year period, the free on-site repair
or replacement of parts and the receipt of notice from demand side, supply-side technical maintenance staff will
promptly arrived at the scene.
2.Supplier guide installation, debugging equipment to normal operation on site
3.The supplier free training buyer's operating and maintenance personnel, life-long free to accept the buyer's technical
consultation.Life of high quality, low price to provide equipment parts and other spare parts.
Contact us
ZhengZhou Great Machinery Equipment Co.,Ltd
ADD:NO.1 Building,University Science Park,High-tech
Development Zone,ZhengZhou city
Tel:0086-371-60206811
Contact person:Penny yang
Skype:greatmachineryequipment
WhatsApp:+86 18530876022
Webset:http://greatmachinery.en.alibaba.com/
www.greatmachineryequipment.com