Introduction of 2016 High output 6 heads Sawdust Wood Pallet Block Pressing line:
1>. 2016 High output 6 heads Sawdust Wood Pallet Block Pressing line have main ten parts: Reception Station,Sterilizer,Threshing,Press,Clarification, Kernel Recover, power station, boiler station, water treatment plant, oil storage tank.
2>. Shandong Leader Machinery Co.,Ltd. use the Fresh Fruit Bunch, because the palm fruit rancidity is very fast, if the rancidity will be influence the palm crude oil acid value, if the acid value is very high, the refining efficiency will drop.
Working principle of Auxiliary Machine For Oil Press:
1. Transferred by the triangle belt, the electromotor drives the spiral shaft.
2. Oil plants being carried toward to the end of the machine by rotating squeeze spirals.
3. With the space between spirals and loops becoming smaller,the pressure in the chest is bigger.
4. During this process, oil plants are smashed and the tissue cells are destroyed, then oil is separated from oil plants.
5. After extracted, oil plants turns to be cakes containing low oil and is discharged in thin slices from the end.
Three-head wood pallet blocks making machine
1.Wood pallet making machine is used to make the block for the pallet which is used into the transportation from sawdust, wood shaving and others wood waste;
2.Middle and around is heated evenly, high strength. The end pallet block is smooth surface and waterproof, durable for use. It could soaked in water 48 hours without cracking;
3.The end pallet block's size can be made according to customer's requirement,
One machine can make two different sizes block.
The production line of the compressed wood pallet machine:
(1)Wood crusher: If the material is bigger than 5*5mm, we advice first crush into small pieces
(2)Dryer machine: If the raw material moisture is bigger than 10%, should use one dryer machine to dry them
(3)Glue mixer: Use the glue mixer to mix the material with glue
(4)Wood pallet machine: Make wood pallet block .
1. What is your quality guarantee period?
Quality guarantee term is for one year.
Malfunctions which are caused by machine-self and quality will be responsible for our manufacturer.
Other malfunctions which are caused by operation mistakes, man-made problems, etc will be responsible for clients-self.
wearable spare parts are not included.
2. What is your accepted payment terms?
what we can accept is by T/T, Western union or cash.
Our payment terms:
1. 50% in advance by T/T, Balance 50% after seeing the faxed copy of B/L
2. Client can choose 100% in advance by T/T.
bank charges will be responsible by the buyer.
3. When the voltage are not suitable for the countries ,how to do ?
The voltage is not always the same , so we will arrange for changing the voltage as your special requirements .
Then , it will need some fee as the changing charges .
4.How about after-sales service?
Our after-sales service is very good. We will provide after-sales service until clients are satisfied. We will try our best to provide user manual, picture, video and so on to help client operate the machine well. if still not work, we will send our engineer to clientsâ work place to help. Or clients can come to our factory to get training. We will provide loading and eating for free.
5. How about the spare parts? Working life?
As for the spare parts, always suggest client buy machine together with some wearable spare parts. In case any damage, can change at once, will not delay the production.