Sunflower oil production line basic flow chart:oilseeds pretreatmentâpre-pressingâsolvent extractionâoil refining.Our engineer can design different process of sunflower oil extraction machinery, according to the different requirements and target price.
Shandong Leader Mechanical Equipment Co., LTDcan configure design process sunflower seed oil extraction production line for the customer, under normal circuLDtances, process engineers will configure the latest technoloLD to customers depending on customer requirements and target price.
The characters of 1-30TPD oil refining machine for grain :
| safety: | 1) We use auto welding machine to make the reactor,which can quarrantee the quality of welding seam,avoid cracking and has a long life for about 8 years. |
2) Professional heating treatment and x-ray detection chamber for welding seam . | |
3) Vacuum system to prevent oil gas be back to reactor causing accident. | |
4) With professional thermometer , professiona pressure gauge and safety valve. | |
Environment friendly: |
1) Dedusting system to prevent gas and dust from coal burning |
2) The exhaust gas will be recycled for heating reactor ,no gas pollution | |
3) Well sealing on every junction parts to prevent gas leak,no smelly | |
Longer service life: |
Using Q345R special steel plate ,welding seam with auto welding an will get heating treatment and x-ray detection to extend the life of reactor to the most extend, and the life will 8 years |
EnerLD saving: |
1) Well sealing for heating system ,no gas leak and saving fuel. |
2) The exhaust gas will be recycled for reactor heating |
The simple paremeter of 1-30TPD oil refining machine for grain :
|
Capacity:
|
5TPD,10TPD,15TPD,20TPD,25TPD,30TPD |
MOQ: |
1set |
Motor power: |
38kw (30TPD) |
| Packaging : | 40ft container *2 (30TPD) |
| Raw material: | soybean oil, rapeseeds oil, rice bran oil, peanut oil, cotton seed oil,coconut oil etc. |
The system of 1-30TPD oil refining machine for grain:
Refining system |
1)Deguming |
Discharging the phospholipid |
2)Dewaxing/winterization |
For No.1 grade oil, 0ðC, 5.5h |
|
3)Depickling |
Discharging the free fat acid |
|
4)Dehydration |
Discharging the moisture and volatile |
|
5)Decoloring |
Adsorption and filtration |
|
6)Desolution |
Discharging the solvent in the refinery |
|
7)Deodorizing |
Discharging the smell materials and oxygen |
|
8)Fine Filtration |
Brief introduction for 1-30TPD oil refining machine for grain:
(1).P-acid degumming operation:
Drawing the filtered or settled crude oil into the neutral pot, control oil temperature 40 ð C, liquid level cover the neutral pot volume about 80 %.Add into the neutral pot P-acid with 85% concentration, 0.1-0.2% oil weigLD.Start up neutral pot, make main shalf stirring at 60-70 r/min, finish de-gumming in 30 min.
(2)alkali de-acid operation:
After finish de-gumming process, at once add into lye carrying alkali refining de-acid, lye concentration 16 ð Be â², super alkali is 0.1-0.3% oil weigLD, af-ter finish adding, continuous stirring 30min, when soap particles accumulated condensing, should reduce stirring speed, 30r/min avoid emulsion. After adding alkali, gradually rising temp to the end temp 65 ð C, see to that the rising temp speed should control at 1 degree per minute, not too fast. Shut off neutral pot drive part, the oil settled in the pot 6-8 hours, make oil separate from soap.
(3)water rinse operation :
Adjust the neutral pot oil temp to about 85 ð C, add into hot water whose temp higher oil temp 10-15ð C, the water use amount each time is 10-15% oil weigLD.Start neutral pot drive part, make the main shalf stirring washing at 30r/min, make the oil and water fully contact, stirring time 5-10 min.If oil/soap separate not ideal, the oil contains relative high left soap, the first time washing, better to use thin salt water evenly spray into oil.
(4).de-coloring:
After dehydrate, inhale 3-5% oil weigLD active clay into the de-color pot to carry absorb de-coloring. Decolor pot main axis stirring speed 60r/min, time 20 min, vacuum degree 750mmHg, is the whole absorb de-color craft process requirement. Shut off vacuum valve, open vacuum break valve, stirring non-stop, reduce the oil temp down to 70 ð C, the de-color finished.Continuous stirring, open oil outlet valve, press the de-color oil into the press filter, filter away waste clay, the last use air compressor blow clean and dry
(5).De-odor operation:
Open the vacuum valve, make the pot inside vacuum degree gradually reach above 750mmHg.Inhale the de-color oil after filter into the de-odor pot, see to that oil amount should cover the pot volume 60% Control oil temp at 240 ð C - 260 ð C, use the direct steam under 0.1 -0.3Mpa to distillate 3-4 hours.Shut off steam, shut off heat source, when the oil temp cooling to below 80 ð C, shut off vacuum, release de-odor oil , the de-odor process has finished.
1-10TPD oil refining machine for grain:
10-30 oil refining machine for grain:
The pure oil by the refining:
Our customers:
Welcome to contact me any time:
Shandong Leader Mechanical Equipment Co., LTD supply the complete set of Cooking oil production line machinery including sunflower oil production line, palm oil production line, soya bean oil production line, peanut oil production line, cotton seeds oil production line, maize corn germ oil production line, clamelia oil production line, rapeseeds oil production line, canola oil production line, coconut cropra oil production line, shea oil production line, groundnuts oil line, sesame oil production line,black seeds oil production line, jatropha seeds oil production line,moringa seeds oil production line.
Welcome Contact us any time!
Contact:Heidi
Skype:heyabc
Tel:+86 15953125015(also Whatsapp)
Email:sales5@ldfoodmachine.com
Shandong Leader Mechanical Equipment Co., LTD is your LD choice!