palm oil extruder machine (CPO&CPKO)

Shandong Leader Machinery Co.,ltd. is mainly focused on all kinds of seed oil extraction line rice bran oil plant equipment . Our company has established about 30 years . We have got much more experience in this field palm oil extruder machine (CPO&CPKO) . And On the palm oil extruder machine (CPO&CPKO) technology ,we cooperate with our Industry .University .And Shandong Leader Machinery Co.,ltd. have the professional engineer .And our workers all work with their certification . The rice bran oil plant equipment pretreatment process , the rice bran need to be have a magnetic separation palm oil extruder machine (CPO&CPKO) ,removing the small iron ,. Then we need to clean the rice bran ,wipe off the middle or samll light impurities.Then exrusion puffing , make the oil come out easily .After that ,Shandong Leader Machinery Co.,ltd. need to make the rice bran dry by palm oil extruder machine (CPO&CPKO) ,rice bran oil plant equipment control the moisture between 9-9.5 % . Then Shandong Leader Machinery Co.,ltd. send the rice bran to extractor for leaching .

LD company mainly engage in oil machinery oil making plant, rice bran oil production line, palm oil production line/palm kernel,palm fruit oil mill making machine, palm oil processing equipment ,palm oil processing machines,pam oil mill, plam oil processing plant,palm oil expeller machine,palm oil milling machine/equipment,palm oil milling factory/ industry supplier,palm oil mill making machine, palm oil making supplier, palm oil miller industry,palm oil extruding machine,palm extruding equipment,palm oil extruder ,fractionation,cotton seed protein dephenolization,sunflower seed,rapsseeds,cotton seeds,peanut,soybean oil production line,biodiesel continuous production equipment.

Reception station:

1.The FFB bunch be transported to plant by truck, after be weighted by weighting bridge, the FFB will be loaded down to FFB Loa

ding Ramp.

2.The iron door of unloading ramp is controlled by hydraulic device, Get the power from Hydraulic pump station.

3.Start on the hydraulic device, iron door be lifted. F

4. FFB will fall down to the Palm Fruit screw conveyor, be transported to pre-treatment plant, to Vertical sterilizer.

Sterilizing process:

1. By Scraper Conveyor, FFB be transported to the top of sterilizing tank. Falling into sterilizing tank from feed inlet.

2.Sterilizing tank: The inside diameter of sterilizing tank is φ2000mm, length 12500mm, welded up by Q235B material

(Chemical composition:C0.12~0.2%,Si0.12~0.3%,Mm0.3~0.7%,P

3.After FFB be transported into sterilizing tank (202), close the door of sterilizing tank, and open the vent valve behind the tank, then saturated steam,

which pressure is 3bar and temperature is about 130°4. After all the cooling air have been discharged out,close vent valve, proceed to sterilizing section. Sterilizing time is 55~60minutes.

5. The time of sterilizing is also according the kind of FFB, if the pressure is too high or the time is too long , p

alm fruit will be rot, also Resulting in the loss of oil, high temperature can change palm color.

6. Finish sterilizing process, close the steam valve, open the valve lead to Blow-off/down Silencer, cant open the sterilizing tank door until discharges out all steam and water.

7. Open the sterilizing tank door, sterilized FFB will fall on the FFB Scraper conveyor. Be transported to next station.

Threshing station:

1.The sterilized FFB will be transport to thresher platform by scraper conveyor.

2.We adopt advanced Drum type thresher, insider diameter is φ1800mm, length is 5000mm.The material of main shaft is #45 steel

(main chemical composition is C0.42~0.50%, Si0.17~0.37%, Mm0.50~0.30%, P≤0.035%, S≤0.035%, Cr≤0.25%, Ni≤0.25%, Cu≤0.025%).

3.Sterilized FFB be twisted and knocked in thresher. Palm fruit will be separated from empty bunch totally, fall on Fruit Scraper conveyor though fence, the empty bunch will be transported to Bunch Temporary tank by Bunch Scraper conveyor.

Kernel pressing and recovery system:

Drawing of FFB processing plant

When Shandong Leader Machinery Co.,ltd. get the rice bran seed cake from pretreatment ,we need to put the cake to the extractor .Then the palm oil extruder machine (CPO&CPKO) solvent oil dissolve in the oil . We get the mixed oil . We heat the mixed oil by palm oil extruder machine (CPO&CPKO) . And the solvent changes gas . Then we get the oil from the cake .Shandong Leader Machinery Co.,ltd. want to get the one grade rice bran oil or two grade rice bran oil by palm oil extruder machine (CPO&CPKO) .And we must refined the crude oil ,by palm oil extruder machine (CPO&CPKO) ,decolorization , deodorization , deacidifiztion ,dewaxing . We wipe off the phospholipid , free fatty acid , color ,and smell ,wax . Then the rice bran oil plant equipment can be used .raw oil tank and bleached oil tank , accommodated under the structure on the ground floor. Then palm oil extruder machine (CPO&CPKO) cooler, conduction oil furnace, rice bran oil plant equipment steam generators, vacuum pump, water pumps, oil pumps and refined oil tank are arranged on the ground floor around the steel structure i.e.

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:sales21@ldfoodmachine.com
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy

NOTE:We can specially design the machine according to your production's features.