Shandong Leader Machinery Co.,ltd. the crude oil is output by the oil feed pump from the oil tank, and cottonseed oil manufacturing process next enters the crude oil heat exchanger to recover part of heat cottonseed oil manufacturing process after metering and then is heated to the required temperature by the heater. After that,cottonseed oil manufacturing process is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and New design shea butter factionation machine then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and New design shea butter factionation machine the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in the crude oil. Then the oil goes to the washing process. cottonseed oil manufacturing process there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moisture
New design shea butter factionation machine
Company information
XinxiangJinxin Chemical engineering equipment co,. Ltd is mainly focused on all kinds of pressure vessel and machine manufacturing .It is established in 1978 and has much rich experience in this field . .And our best seller is peanut oil machinery .We produce the complete oil production line ,and sell to all the world ,such America , Middle east ,Africa ,Europe etc. 
High-efficient operation conditions for the spiral oil press:
Temperature: 91â~93â;
Low oil yield if temperature4%;
Color of oil is dark with coke cake in, low oil yield when temperature>93â,moisture
Grains filtered are within 10% of the fresh material
Process of later pressing:
The oil from the spiral oil press will be transferred to the screen and settling tank, some grains will be separated out;
The grains will be re-processed together with the material;
Each ton upper oil need to mix with 10kg argil;
Boiled oil will be produced after the colation, the dregs will be further processed and sent to the feed mills.
CertificationsWe insist on putting the quality on the first .And we rewarded ISO9001 ,Manufacture license of Special Equipment certification ,and Design license of Special Equipment certification
Trade ShowsWe export our goods to everywhere on the earth,and we insist that the customer's request is the first place.
So if you need our products,please contact with us, we will try our best to meet your needs!
Shandong Leader Machinery Co.,ltd. there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, cottonseed oil manufacturing process add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. New design shea butter factionation machine To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and New design shea butter factionation machine then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, cottonseed oil manufacturing process and the waste water is discharged to the sewage treatment station.and then Shandong Leader Machinery Co.,ltd. the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:sales21@ldfoodmachine.com
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy
NOTE:We can specially design the machine according to your production's features.