Shandong Leader Machinery Co.,ltd. the crude oil is output by the oil feed pump from the oil tank, and cottonseed oil manufacturing process next enters the crude oil heat exchanger to recover part of heat cottonseed oil manufacturing process after metering and then is heated to the required temperature by the heater. After that,cottonseed oil manufacturing process is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and Factory installation Palm oil extract equipment then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and Factory installation Palm oil extract equipment the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in the crude oil. Then the oil goes to the washing process. cottonseed oil manufacturing process there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moisture
Factory Installation Palm oil extract equipment
Our company is a large-sized joint-equity enterprise which specialize in producing edible oil machanical equipment and it is also a group enterprise integrating scientific research,manufacturing ,sales as one.research institute of machine design company and henan,henan university of technology(formerly the Shandong grain college)school-enterprise cooperation in the oil equipment to carry out long-term,protein extraction,phospholipid extraction,etc R&D and application of new technologies.
The international level-workshop of our plant
FFB FROM PLANTATION
1. Special for Palm oil extract equipment
2.The processing technology parameter of Palm oil extract equipment
3. Palm oil extract equipment Sterilizing station:
As the FFB acid value increase very fast, we should make the sterilizing treatment
4. FFB press station of Palm oil extract equipment
Adopt horizontal palm fruit pulp presser, special for FFB
5. The refining method of oil refinery
1. Chemical refinery
2. Physical refinery
3. Chemical &physical combination refinery
6. The detail of new design Palm oil extract equipment:
1. The decolour tank is for bleaching grease.
2. The deodorizing tank is for deodorizing grease (stainless steel).
3. The conducting oil furnace provides thermal energy need for production, the temperature reach to 280degree.
4. The vacuum pump provides vacuum for bleaching, deodorization which can reach 755mmHg or more;
5. The Air compressor can dry the bleached clay
6. The air press is for filter clay
7. The steam generator can generate steam distillation required.
8. This kind of oil refining equipment make the oi reach the standard level national edible oil.
7. The oil quality outcome standard:
1. Grade one for salad oil
2. Grade two for high quality cooking oil
3. Mixture and volatileâ¤0.25%.
4. Impurityâ¤0.2%.
5. AV (mgKOH/g)â¤7
6. FFAâ¤5%
Advanced workshop
Shandong Leader Machinery Co.,ltd. there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, cottonseed oil manufacturing process add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. Factory installation Palm oil extract equipment To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and Factory installation Palm oil extract equipment then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, cottonseed oil manufacturing process and the waste water is discharged to the sewage treatment station.and then Shandong Leader Machinery Co.,ltd. the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:sales21@ldfoodmachine.com
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy
NOTE:We can specially design the machine according to your production's features.