Cotton oil pretreatment for cotten seed

Seed Hydraulic Press Machine operating principle:
1.When oil press is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.
2.Under hightemperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials.
3.On the other hand, root diameter of the pressing screw carries larger from one end to the other.
4.Hence when rotating, the thread not only pushes particles moving forwards but also turns them outwards as well.
5.Meanwhile, particles adjacent the screw will rotate along with screw’s rotating, causing every particle inside the chamber to possess different speed.
6.Therefore, relative movement among particles creates neat which is necessary during manufacturing because of helping protein change property, damage colloid, increase plasticity, decrease oil’s elasticity, resulting in high oil.

More than 30 years including 5 years overseas market experience of designing and installing complete Seed Hydraulic Press Machine,Shandong Leader Machinery Co.,Ltd. are now a leading company in Cotton oil pretreatment for cotten seed field.
Shandong Leader Machinery Co.,Ltd. supply various Seed Hydraulic Press Machine and connected equipments :
(1) High oil yield,obvious economic benefit .
(2) Lower residual oil rate in the dry meal .
(3) Improving the quality of the meal .
(4) Low processing cost , high productivity.
(5) Saving energy,saving labor.

Cotton oil pretreatment for cotten seed

1.We are Alibaba Assessed 7 years Gold Supplier.
2.We are a factory manufacturing edible oil machine from 1982,best production capability,best quality control, Best Service.
3.Inspected by the Inspection Institution of Bureau Veritas Certification.
4.100% QC inspection Before Shippment.
5. CE listed,competitve price.

1.Edible oil pretreatment workshop ---Pre-press equipment

Pre-press equipment - Main Equipments:

1. Storange tanks: Oil seeds receiving and storage

2. Magnetic box: Clearing the iron impurity which might be in the oil seeds. The iron impurity will be harmful to the following machines, so we need take the iron impurities out.

3. Cleaning: This parts have different size cleaning sieves to clean the different impurities. After going through this part, most of the impurities are moved from oil seeds.

4. Cooker: This machine can adjust the water content of the oil seeds. It’s also good for the press and oil extraction section.

5. Press: The press machine is used to take parts or all of the oil in the oil seeds. We will design the suitable machine according to your requirement.

6. Oil filter: After getting coconut oil, the filter is used to move the impurities in the oil.

2.Edible oil extraction workshop-Pre-press equipment

Pre-press equipment=========Main Equipments:

1. Solvent pumps: continuously spray solvent to the rotary-typr extractor.

2. Roary extractor: spray and soak the cake with solvent so that oil fats can be dissolved in solvent (form miscella). After processing, you can get wet meal and miscella (mixed oil).

3. DTDC: used to separate the solvent from the wet meal.

4. Miscella tank 1st: pump the miscella ( oil with solvent) into the miscella 1st, then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.

5. Miscella tank 2nd: the purified miscella will be pumped into it.

6. Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.

7. Condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.

3.Edible oil refining workshop---Pre-press equipment

Pre-press equipment---Main Process:

1. Degumming and deacidification: The gumming is moved by phosphoric acid and hot water. There are two ways to move the acid in the edible oil. One is chemical way, the other one is physical way. The chemical way is using NaOH to react with acid. This way is suitable for the capacity of 5-30T per day.

The physical way is using steam and centrifugal to move the acid. This way is used for capacity from 30-2000T per day.

2. Decolorization: This step is used to adjust the color of the oil. You can control the color of the edible oil according to the requirement of your market.

3. Deodorization: The function of this step is to move the special smell in the oil. This is an important standard for refined edible oil.

Shandong LD Grain&Oil Machine Co.,Ltd has applied the automatic control system with advancedness, security, reliability into the pretreatment, extraction, refining and fractionation in large oil plants. For its application in automatic control system, it can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person only can operate the entire workshop, with efficient production management. It has reduced the production cost greatly and improved the management efficiency.

1. The Shandong Qi’e grain and oil machinery company’s experts guide installation and have good technology.

We make the cooperation with Qi’e group many times. Their experts guide installation on-site and after-sales team provides 24 hours of technical services.

I think they have done a well in this respect. Among the large number of grease equipment manufacturers, they are very good in China. Hope we can continue to cooperate in the future.

2. Shandong Qi’e grain and oil machinery company’s equipment have good quality, and shipped on time.

We make the cooperation with Qi’e group for long time. Because they are manufacturer, their equipment have good quality assurance and reasonable price. They shipped on time after we finish contract.

If you are interested in our products, please kindly send me your inquiry details in the Below , Click "Send" Now!

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of Cotton oil pretreatment for cotten seed.Shandong Leader Machinery Co.,Ltd. manufacture Cotton oil pretreatment for cotten seed making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Seed Hydraulic Press Machine for you reference,such as Cotton oil pretreatment for cotten seed ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Seed Hydraulic Press Machine.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:sales2@ldfoodmachine.com,Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Cotton oil pretreatment for cotten seed, inform us raw material you want to use for Cotton oil pretreatment for cotten seed,and specific requirements for Cotton oil pretreatment for cotten seed.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Seed Hydraulic Press Machine.