China complete palm oil processing machine from Shandong Microwave Machinery Co.,Ltd.
Equipments of China complete palm oil processing machine which directly related to the palm fruit oil process are divided into six systems as follows:
1.Fruit reception system of China complete palm oil processing machine
1.1 Use truck to transport the ripe and fresh palm fruits from fruit ranch, weigh up them by platform scale and record, and then pour them into the discharging table.
1.2 Start control valve to open the discharging table, then fruit drop in the fruit basket car freely.
1.3 Drag the fruit basket car which loaded with fresh palm fruits to the downward of the bridge crane by power cable tray
and cable tray, then use bridge crane to sling the fruit basket car to the track lead to sterilizer sterilizing tank.
2. Sterilizer system of China complete palm oil processing machine
2.1 After drag the fruit basket car into the sterilizer sterilizing tank, close the sterilizer sterilizing tank and open the vent
valve below it. Then inlet saturated vapor, close the vent valve after the cold air in the tank was excluded generally, and
enter into the period of steaming and sterilizing.
2.2 Close the inlet valve after the sterilizing process. Drain out the water and vapor in tank, then you can open the door of
the sterilizer sterilizing tank.
2.3 Drag the cooked fruit basket car to the downward of the beige crane.
3.Threshing system of China complete palm oil processing machine
3.1 Pour the sterilized fruit in the fruit basket car into the unloading equipment.
3.2 Feed the fruit regularly into the fruit-separating machine to separate.
3.3 After twisting and beating in the fruit-separating machine, the fruits will fall off entirely.
4. Pressing system of China complete palm oil processing machine
4.1 Palm fruit was transported to crasher by elevator.
4.2 Fruit was heated in crasher.
4.3 After sterilizing, the broken palm fruit flow into the palm oil press machine to pressing.
China complete palm oil processing machine
Palm fruit, palm kernel, coconut, cashew, avocado, tiger nut, peanuts, rapeseeds, soybeans,
castor oil plant, sesame seeds, benne seeds, sunflower seeds, cotton seeds, tea seeds,
Tung seeds and etc.
1. Introduction of palm oil refining machine
1) Function: palm oil refining machine is an oil extractor through soaking or spraying pre-pressed cake
by a certain organic solvent. The principle of this part is the different solubility of solvent.
2) Use range: palm oil refining machine fits for pre-press extraction of high-oil- content materials and
direct once time extraction of low-oil-content materials.
3) Main parts: palm oil refining machine series includes rotary extractor, toaster, 1st evaporator, 2nd
evaporator, stripping tower, condenser, etc.
2. Main parts of palm oil refining machine
1) Solvent pumps: continuously spray solvent to the rotary-type extractor.
2) Rotary extractor: spray and soak the prepressed cake with solvent so that oil fats can be dissolved in
solvent (form miscella). After processing, you can get wet meal and miscella (mixed oil).
3) DTDC: used to separate the solvent from the wet meal.
4) Miscella tank 1st: pump the miscella (oil with solvent) into the miscella 1st, then add 10% saline water to it. The phospholipids and impurities in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.
5) Miscella tank 2nd: the purified miscella will be pumped into it.
6) Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to
condenser for recycling.
7) Condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.
3. Main Process of palm oil refining machine
1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.
2) Meal is send to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.
3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.
4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the
stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary
extraction.
4. Full automatic of palm oil refining machine
5. Our factory
6. Advantages of palm oil refining machine
1) High oil yield, obvious economic benefit.
2) Less residual oil rate in the dry meal.
3) Improving the quality of the meal.
4) Low processing cost, high labor productivity.
The oil quality outcome standard:
1. Grade one for salad oil
2. Grade two for high quality cooking oil
3. Mixture and volatile≤0.25%.
4. Impurity≤0.2%.
5. AV (mgKOH/g)≤7
6. FFA≤3.5%.
our sorkshop
packaging site
shipment
customer visiting
our lab
any question please contact me
Shandong Microwave Machinery Co.,Ltd.is a crude palm kernel oil press production line factory specializing in the production of China complete palm oil processing machine, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide crude palm kernel oil press production linecustomers with design and services of 1-2000 tons China complete palm oil processing machine. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects crude palm kernel oil press production lineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type crude palm kernel oil press production lineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. crude palm kernel oil press production lineequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.
Contact us:
Carrie-Sales manager
Shandong Microwave Machinery Co.,Ltd.
Web: www.epier.com
Email: sales10@ldfoodmachine.com
Skype:leaderfoodmachine10
Moblie:0086-15020017267(also WhatsApp)