Specifications
bottle blow making machine1.large volume 50L
2.applicable for PE/PP/PS raw material
50L bottle blow making machine
1.large volume 50L
2.applicable for PE/PP/PS raw material
Introduction:
1.This series is applicable for PE/PP/PS raw material, and volume between 20L and 50L. It is widely used in plastic barrel, tool boxes, hollow desk board, chairs, auto parts and other large and medium-sized plastic hollow products.
2.Adopts two pull-rod type closing-mold device by rack and pinion system. The large setting platen is suitable for varilus sizes of molds.
3.Adopts accumulator die head, with high quality nitrogen treatment and hardness of
surface, resulting smooth flow and quick parison ejection.
4.Based on products, equip with 30points or 100points standard parison controller, to
control the thickness of parison precisely.
Technical parameter
Category |
Item |
Unit |
50L |
Extruder unit |
Screw diameter |
mm |
90 |
|
Screw L/D ratio |
L/D |
25.1 |
|
Plasticising capacity |
Kg/h |
120 |
|
Number of heating zone |
kw |
12.5 |
|
Extruder driving power |
zone |
6 |
|
Extruding heating power |
kw |
30 |
Die head |
Number of heating zone |
zone |
4 |
|
Power of die heating |
kw |
8 |
|
Max die pin diameter |
mm |
400 |
|
Accumulator capacity |
kg |
6 |
Special cations |
Max die-pin diameter |
L |
50 |
|
Machine dimension |
m |
5*3.1*3.9 |
|
Total weight |
t |
9 |
Clamping unit |
Clamping force |
kn |
400 |
|
Platen opening stroke |
mm |
350--1250 |
|
Max mold size |
mm |
900*1200 |
|
Mold thickness |
mm |
360*600 |
Power |
Oil pump motor |
kw |
11 |
|
Total power |
kw |
70 |
|
Fan power for screw |
kw |
0.72 |
|
Air pressure |
Mpa |
0.7 |
|
Air consumption |
M3/min |
0.9 |
|
Average emergy consumption |
kw |
35 |
Main picture
Remarks
Ⅰ.Delivery time: 20 days after receiving the whole payment.
Ⅱ.Payment term: 100% in advance by T/T
III. Valid time : This quotation is valid for one month.
IV .Quality Guarantee Terms:
Quality guarantee term is for one year(exclude wearable spare parts) . Malfunctions which are
caused by machine-self and quality will be responsible for our manufacturer. Other malfunctions
which are caused by operation mistakes, man-made problems, etc will be responsible for clients-self.
