Low Price Environmental Wall Groove-cutting machine
1.Brief introduction
The wall groove-cutting machine can be used for solid red bricks, hollow bricks, such as lightweight brick walls and sand cement cover metope of water pipe, wire and tube and so on tube slot opening. This machine to ensure can meet the demand of water and electricity installation engineering teams;Wall slot, The ground slot, we can't start its work,all aspects can be met according to the client's demands.
2.Parameters and Specification
Voltage |
220V, 240V, 110V, 127V |
Frequency |
50/60Hz |
Motor power |
1450W |
Output shaft speed |
1800rpm |
Groove width |
25mm/35mm |
Groove depth |
20-25mm,30-40mm |
Net /gross(1 set)/gross(2 sets) |
7.5/12/23.5kg |
Packing dimension 1 set/2 sets |
45*22*32cm/45*44*32cm |
Inner/outer packing |
Blow molding tool kit/carton |
Certification |
GS/CE/EMC/ROHS |
3.Grooving speed
Wall body material |
Slot speed |
Lightweight brick wall |
6min/min |
Hollow brick wall |
3m/min |
Solid brick wall |
2m/min |
Red brick wall covering fine sand cement |
1m/min |
4.Advantages
1).Slot efficiency of wall groove-cutting machine is ten times the efficiency of the ordinary slot way.Ordinary slot way is to use marble machine and electric pick, time-consuming and, to use a marble cutter first two lines, then use electric pick to chisel wire slot, but this machine ,simple operation and effort, efficiency improved significantly, can reduce the construction cost.
2).This slot function according to the needs of construction such as water and electricity installation, quickly issued a different Angle, curvature, straight and curved shape of the trough of the deep trough rapid, trough type is beautiful and practical.Easy and convenient blade.
3).The wall groove-cutting machine power is stronger than similar products the market power,and slot more easily.
4).The wall groove-cutting machine has special aspiration,when it works,plug in vacuum tube and and deserve to go up a vacuum cleaner, dust decreased significantly and the operating environment more clean. Besides ,it also significantly reduce health damage to people because of dust. Thus ,the wall groove-cutting machine is more environmental product.
4. Standard attachments
Name |
Quantity |
Remark |
Blade |
1 |
blade with 25mm,35mm blade need to be purchased |
Knife special spanner |
1 |
Remove the blade special |
14-17 open spanner |
1 |
Release the blade sticking the knife shaft |
Ratchet spanner |
1 |
Adjust the wheel nut(slot depth) |
Blow molding box |
1 |
For the machine and attachments |
5.About blades
1).The wall groove-cutting machine applies twp kinds of blades, one kind is included in the standard attachments:25mm blade, the other blade need to be purchased:35mm blade
25mm blade:groove depth:20-28mm, groove width:25-26mm
35mm blade: groove depth:25-40mm, groove width: 35-38mm
2).The service life of blede
Wall body material |
Slot length |
Lightweight brick wall |
More than 8000m |
Hollow brick wall |
More than 6000m |
Solid brick wall |
4000m |
Red brick wall covering fine sand cement |
3000m |
5.Contact us
