Semi-automatic ballpoint pen production line
1.Cheap
2.Good quality
3.Semi-automatic
4.Easy operat
Easy operat Semi-automatic ballpoint pen production line
This ballpoint pen production line is including 5 set machines.Total capacity is 2000 pcs/8h.(This model is suitable for home workshop)
1.Ink injection equipment
Brief introduction:
Aim the the core of tubing to the ink outlet , pull the pull rod down then the process of injecting ink will be finished. (the filling volume can be adjusted )
Dimension : 40*14*23 cm
Weight : 5.9 kg
Note : After injecting the ink, the core of tubing can not put up-right .
2.Fittings equipment
Brief introduction :
Put the core of tubing into the moulds ,put the adapting piece into the mould (the small head down) ,pull down the pull rod then the fittings process will be finished.
Dimension : 40*13*17 cm
Weight : 5.4 kg
3.Install copper head equipment
Brief introduction :
Put the core of tubing into the groove of the mould, put the copper head to the mould , pull the pull rod down then the installing of the copper head will be finished.
Dimension : 40*13*17 cm
Weight : 5.4 kg
4.Tail oil injection equipment
Brief introduction :
Put the installed copper head tubing into the tail oil injection needle and don’t not touch the ink , pull down the pull rod the the injecting of the tail oil process is finished.
Dimension : 40*13*23 cm
Weight : 5.9 kg
5.Centrifugal machine
Brief introduction :
After dealing by the centrifuge machine the air in the tubing will be expel out ,solve the tail gas bubble and wiredrawing phenomenon.
Dimension : 45*30 cm
Weight : 20 kg
Products show :