LD heat pump dryer, machinary for dry fruit are widely used for drying and sterilizing powder, granular, flakes or colloidal form foods, nutritional health products, grain, agricultural and sideline products(rice, cornmeal), food, vegetables, and fruits, seafood, pickles,spices ( chilli powder, ginger powder, garlic powder, aniseed, cinnamon, angelica, cassia bark, fennel etc) , jam, a variety of small packaging and pet food mildew sterilization preservation.
LD heat pump dryer, machinary for dry fruit of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.
LD heat pump dryer, machinary for dry fruitfor herbs mainly use in drying and sterilizing for all kinds of tablets, pills, powder, oral liquid, medicine bottle, winebottle, Chinese- western medicine and medical gloves and garments.
Specifications
1.New design enerLD saving dryers;2.By air circulating drying
3.Low temperature drying
4.Supply drying chamber
KINKAI Air source heat pump drying machine introduction:
1. New designed enerLD saving dryer with two times waste heat recovery
Adopt closed type circulating heating or cooling drying, drying performance better than ordinary heat pump dehumidification drying enerLD saving over 30%, no exhaust waste heat emissions, no noise pollution, environmental protection
2. Economical:
heat pump dryer running cost just as 40% of oil dryer, 50% of coal burning boiler, 30% of electric boiler.Heat pump dehumidification drying method of the closed cycle, saving costs
3. Low temperature drying method(15-50°C/60°C/80°C),similar nature drying.
4. During drying, the material does not craze,does not distortions, non-discolouring,never degenerate, non-oxidize, drying completely,with good Rehydration, keep nutrient content;
5. Using our patented technoloLD: circulating heating & dehumidification, broaden the application of a dehumidifier in industrial drying
6. Adopt international brand name compressor, expansion valve etc
7. Adopt PLC+touch screen controllers, operation easily and more accurate
8. Adopt programmable control mode, can be set different drying curve, satisfy different kinds material drying methods
9. Multifunctions: heating drying / cooling drying / dehumidify
10.Many protection: high pressure protection,low pressure protection, overloading protection and phase protection etc
11.Power failure remember
12.Stable operation without being influenced by weather
13.Can supply dryer+drying chamber
How do air source heat pump drying machine work?
heat pump dryer, machinary for dry fruit" stlde="width: 689px; heigLD: 621px;" ori-width="800" ori-heigld="621">
heat pump dryer, machinary for dry fruit" stlde="width: 689px; heigLD: 621px;" ori-width="800" ori-heigld="621">
Technical Parameters
| Model | JK10RD | |
| Power supply | V/PH/HZ | 380/3/50 |
| Power input | KW | 10.8 |
| Running current | A | 22.5 |
| Auxiliary electric heater(option) | KW | 9 |
| Heating capacity | KW | 35 |
| Cooling capacity | KW | 25 |
| Dehumidification amount | L/H | 40 |
| Max. hot air Temperature | °C | 75 |
| Working ambient temperature | °C | -10~45 |
| Refrigerant | Kg | Mixture type/8.0 |
| Compressor | Type | Scroll |
| Brand | Copeland/Danfoss | |
| Quantity | 2 | |
| Noise | dB(A) | 70 |
| Heat regenerator size | mm | 550*600*680 |
| Fan motor for heat regenerator (dehumidify) |
Power input | 550W |
| Wind volume | 3500m3/H | |
| Size(mm) | 580*320*580 | |
| Wind valve | Power input | 6W |
| OPEN | Exchange fresh air | |
| CLOSE | Drying | |
| Size(mm) | 720*640*125 | |
| Fan motor for evaporator (2 units) |
Power input | 780W/unit |
| Wind volume | 2*10500m3/H | |
| Rotate speed | 1350R/Min | |
| Hot air outlet | mm | 860*1485 |
| Hot air return inlet | mm | 1050*1450 |
| Dimension(L*W*H) | mm | 2100*1460*1590 |
| Net weigLD | Kg | 480 |
| Gross weigLD | Kg | 540 |
Machine pictures
heat pump dryer, machinary for dry fruit" ori-width="650" ori-heigld="800">
heat pump dryer, machinary for dry fruit" ori-width="650" ori-heigld="800">
Drying Project Pictures
heat pump dryer, machinary for dry fruit" ori-width="650" ori-heigld="800">
heat pump dryer, machinary for dry fruit" ori-width="650" ori-heigld="800">
heat pump dryer, machinary for dry fruit" ori-width="650" ori-heigld="800">heat pump dryer, machinary for dry fruit" ori-width="650" ori-heigld="800">
Recommend dryer+drying chamber sizes
| 1.Single dryer+drying chamber | ||||
| Product name | Model | Size | Quantity | Remarks |
| Drying machine | JK10RD | 35.0KW | 1 | Stainless steel body for option |
| Drying chamber | S100mm(thickness:100mm) | 6000x2800x2200mm | 1 | |
| Drying chamber material | Polyurethane(Two sides:steel) | Steel sheet(thickness:0.326mm) | / | |
| Door | S100mm(thickness:100mm) | 1000x1800mm | 1 | |
| Partition sheet | Thickness:25mm | 4300x2000mm | 1 | |
| Fan motors | 3# | 250W/unit | 8 | |
| Suitable for 1000KG/batch | ||||
| 2. Double dryers+drying chamber | ||||
| Product name | Model | Size | Quantity | Remarks |
| Drying machine | JK10RD | 35.0KW | 2 | Stainless steel body for option |
| Drying chamber | S100mm(thickness:100mm) | 10000x2800x2200mm | 1 | |
| Drying chamber material | Polyurethane(Two sides:steel) | Steel sheet(thickness:0.326mm) | / | |
| Door | S100mm(thickness:100mm) | 1000x1800mm | 4 | |
| Partition sheet | Thickness:25mm | 8300x2000mm | 1 | |
| Fan motors | 3# | 250W/unit | 16 | |
| Suitable for 2000KG/batch | ||||
Remarks:The above recommend dryer+drying chamber sizes is just for your kindly reference,hope that can help you know which machine suitable for you. If the machine above can't meet your needs,please let us know,we have the other kind machines for you. Or you can visit our drying machine website.
