Drying Equipment Type Dry Ginger Processing Machine are widely used for drying and sterilizing powder, granular, flakes or colloidal form foods, nutritional health products, grain, agricultural and sideline products(rice, cornmeal), food, vegetables, and fruits, seafood, pickles,spices ( chilli powder, ginger powder, garlic powder, aniseed, cinnamon, angelica, cassia bark, fennel etc) , jam, a variety of small packaging and pet food mildew sterilization preservation.
Drying Equipment Type Dry Ginger Processing Machine of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.
Drying Equipment Type Dry Ginger Processing Machinefor herbs mainly use in drying and sterilizing for all kinds of tablets, pills, powder, oral liquid, medicine bottle, winebottle, Chinese- western medicine and medical gloves and garments.
Drying Equipment Type Dry Ginger Processing Machine
Product Description
What Are LD Drying Equipment Type Dry Ginger Processing Machine?
LD third generation heat pump drying equipment type dry ginger processing machine is a device that transfers heat from a colder area(ambient temperature) to a hotter area(drying chamber) by using mechanical enerLD. Cycle hot air assures uniform drying and high efficiency.
How Does It Work?
1, Dryer evaporator of refrigerant absorb the air from outside
2, then compressor works that make the air temperature rise
3, heat exchanger change the hot air into drying chamber
4, final gingers will be dried by the hot air circulating in drying chamber
What Is The Advantage of Dry Ginger Processing Machine?
1, EnerLD saving
Adopt heat pump technoloLD, absorb heat from air and recovery waste heat at the same time
Adopt close dehumidify + circulating drying type, saving operating cost;
2, Exact control temperature and humidity
The drying temperature can be easily controlled by PLC +Touch Screen control system.
3, Uniform drying
By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so the raw materials can be dried evenly
4, The temperature: 10-75°C, Max 75°C, similar nature drying.
5, The baking plate dimensions and materials can customize as customer request.
6, Good drying quality.
During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good rehydration, keep nutrient content;
7, Safe and reliable operation
Automatic intelligent control, 24-hour continuous drying; Without waste gas and waste heat pollution,low noise
Stable operation without being influenced by weather
Technical Parameters of Dry Ginger Processing Machine
| Model | Unit | JK03RD | JK06RD | JK10RD | |
| Heating capacity | KW | 12.00 | 26.00 | 35.00 | |
| Cooling capacity | KW | 7.50 | 20.00 | 25.00 | |
| Power supply | V/PH/HZ | 220/1/50 or 380/3/50 | 380 / 3 / 50 | 380 / 3 / 50 | |
| Power input |
Compressors | KW | 2.80 | 5.30 | 9.30 |
| Evaporator Fan motors | KW | 0.78 | 0.78 | 1.50 | |
| Hot air circulating fan motors | KW | 2.00 | 2.00 | 2.00 | |
| Dehumidify fan motor | KW | 0.37 | 0.37 | 0.55 | |
| Auxiliary electric heater | KW | 3.00 | 6.00 | 9.00 | |
| Total Running current | A | 35.00 or 20.00 | 30.00 | 45.00 | |
| Dehumifification amount | L/H | 12 | 25 | 40 | |
| Max. hot air temperature | ℃ | 75 | 75 | 75 | |
| Working ambient temperature | ℃ | -10 ~45 | -10 ~45 | -10 ~45 | |
| Noise | dB(A) | 75 | 75 | 75 | |
| Hot air circulating fan motors | Power input/qty | 250W/unit | 250W/unit | 250W/unit | |
| Wind volume | 2500m3/H/unit | 2500m3/H/unit | 2500m3/H/unit | ||
| fan moter quantity | 6 units | 8 units | 8 units | ||
| Dimension(L*W*H) | mm | 1650*960*1280 | 1730*1220*1280 | 2100*1460*1590 | |
| WeigLD | Net weigLD | Kg | 210 | 385 | 480 |
| Gross weigLD | 240 | 420 | 540 | ||
Buying Guides
Which Model Should I Buy?
| Recommend Dryer + Drying Chamber Sizes | |||
| Item | Description | Product Capacity | Drying Chamber size |
| 1 | One unit JK03RD dryer + drying chamber | 300Kg / batch | 3300*1900*2200mm |
| 2 | One unit JK06RD dryer + drying chamber | 600Kg / batch | 6000*2800*2200mm |
| 3 | One unit JK10RD dryer + drying chamber | 1000Kg / batch | 6000*3000*2200mm |
| 4 | Two units JK03RD dryers + drying chamber | 1200Kg / batch | 7000*2200*2200mm |
| 5 | Two units JK06RD dryers + drying chamber | 1500Kg / batch | 10000*2800*2200mm |
| 6 | Two units JK10RD dryers + drying chamber | 2500Kg / batch | 10000*3000*2200mm |
Warm prompt: We can make any drying chamber sizes as your required.
Packaging & Shipping
For heat pump dryer parts---with plywood
For drying chamber +trolleys
If shipped with 20ft container or 40ft container, no packing
If shipped with LCL( less than container load), packed in plywood.
Our Services
A. Technical service
1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
B. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.