Hot selling new functional excalibur dehydrator are widely used for drying and sterilizing powder, granular, flakes or colloidal form foods, nutritional health products, grain, agricultural and sideline products(rice, cornmeal), food, vegetables, and fruits, seafood, pickles,spices ( chilli powder, ginger powder, garlic powder, aniseed, cinnamon, angelica, cassia bark, fennel etc) , jam, a variety of small packaging and pet food mildew sterilization preservation.
Hot selling new functional excalibur dehydrator of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.
Hot selling new functional excalibur dehydratorfor herbs mainly use in drying and sterilizing for all kinds of tablets, pills, powder, oral liquid, medicine bottle, winebottle, Chinese- western medicine and medical gloves and garments.
Product Description
LD Air source dehydration machines introduction:
1.circ New designed enerLD saving dryer with two times waste heat recovery
Adopt closed type ulating heating or cooling drying, drying performance better than ordinary heat pump dehumidification drying enerLD saving over 30%, no exhaust waste heat emissions, no noise pollution, environmental protection
2. Economical:
heat pump dryer running cost just as 40% of oil dryer, 50% of coal burning boiler, 30% of electric boiler.Heat pump dehumidification drying method of the closed cycle, saving costs
3. Low temperature drying method(15-50°C/60°C/80°C),similar nature drying.
4. During drying, the material does not craze,does not distortions, non-discolouring,never degenerate, non-oxidize, drying completely,with good Rehydration, keep nutrient content;
5. Using our patented technoloLD: circulating heating & dehumidification, broaden the application of a dehumidifier in industrial drying
6. Adopt international brand name compressor, expansion valve etc
7. Adopt PLC+touch screen controllers, operation easily and more accurate
8. Adopt programmable control mode, can be set different drying curve, satisfy different kinds material drying methods
9. Multifunctions: heating drying / cooling drying / dehumidify
10.Many protection: high pressure protection,low pressure protection, overloading protection and phase protection etc
11.Power failure remember
12.Stable operation without being influenced by weather
13.Can supply dryer+drying chamber
How does air source dehydration machines work?
Technical Parameters
| Model | JK06RD | |
| Power supply | V/PH/HZ | 380/3/50 or 220/1PH/50 |
| Power input | KW | 5.8 |
| Running current | A | 12.6 |
| Auxiliary electric heater(option) | KW | 9 |
| Heating capacity | KW | 26 |
| Cooling capacity | KW | 20 |
| Dehumidification amount | L/H | 20 |
| Max. hot air Temperature | °C | 75 |
| Working ambient temperature | °C | -10~45 |
| Refrigerant | Kg | Mixture type/4.3 |
| Compressor | Type | Scroll |
| Brand | Copeland/Danfoss | |
| Quantity | 1 | |
| Noise | dB(A) | 65 |
| Heat regenerator size | mm | 500*500*580 |
|
Fan motor for heat regenerator (dehumidify) |
Power input | 200W |
| Wind volume | 2000m3/H | |
| Size(mm) | 450*330*380 | |
| Wind valve | Power input | 6W |
| OPEN | Exchange fresh air | |
| CLOSE | Drying | |
| Size(mm) | 480*320*120 | |
|
Fan motor for evaporator (1 unit) |
Power input | 370W/unit |
| Wind volume | 2000m3/H | |
| Rotate speed | 1350RPM | |
| Hot air outlet | mm | 650*1100 |
| Hot air return inlet | mm | 750*1100 |
| Dimension(L*W*H) | mm | 1720*1160*1280 |
| Net weigLD | Kg | 385 |
| Gross weigLD | Kg | 420 |
Dehydration machines product photograph:
Drying project cases
We have been producing the dehydration mechine for many years.As a new technoloLD products are well received all around the world!
Finished installation:
Recommend dryer+drying chamber sizes
According to you demand,we offer special order service
| 1.Single dryer+drying chamber | ||||
| Product name | Model | Size | Quantity | Remarks |
| Drying machine | JK06RD | 26.0KW | 1 | Stainless steel body for option |
| Drying chamber | S100mm(thickness:100mm) | 6000x2500x2200mm | 1 | |
| Drying chamber material | Polyurethane(Two sides:steel) | Steel sheet(thickness:0.326mm) | / | |
| Door | S100mm(thickness:100mm) | 1000x1800mm | 1 | |
| Partition sheet | Thickness:25mm | 4300x2000mm | 1 | |
| Fan motors | 3# | 250W/unit | 8 | |
| Suitable for 600KG/batch | ||||
| 2. Double dryers+drying chamber | ||||
| Product name | Model | Size | Quantity | Remarks |
| Drying machine | JK06RD | 26.0KW | 2 | Stainless steel body for option |
| Drying chamber | S100mm(thickness:100mm) | 8000x2500x2200mm | 1 | |
| Drying chamber material | Polyurethane(Two sides:steel) | Steel sheet(thickness:0.326mm) | / | |
| Door | S100mm(thickness:100mm) | 1000x1800mm | 4 | |
| Partition sheet | Thickness:25mm | 6300x2000mm | 1 | |
| Fan motors | 3# | 250W/unit | 16 | |
| Suitable for 1200KG/batch | ||||
Remarks: The above recommend dryer+drying chamber sizes are just for your kindly reference, If the machine above can't meet your needs,please contact us,we accept special order ,meamwhile you can visit our website of heat pump dryer.
Our Services
Warranty:
if you have any question on our products,please contact us any, we will respond your questions asap.
1) LD can supply OEM service for customers.
2) Produce heat pump according to customer's special demands.
3) Supply spare parts according to order quantity.
4) General testing and operational test carried out for every unit before delivery
5)offer technical support
If you have any questions about our products, please feel free to contact us,or you can browse our webside as follows:
LDtp://www.heat-pump-dryer.com
www.youtube.com/watch?v=K6WMogw0GDs