500-600kg Industrial fruits dehydrater (longan/Apples/red dat are widely used for drying and sterilizing powder, granular, flakes or colloidal form foods, nutritional health products, grain, agricultural and sideline products(rice, cornmeal), food, vegetables, and fruits, seafood, pickles,spices ( chilli powder, ginger powder, garlic powder, aniseed, cinnamon, angelica, cassia bark, fennel etc) , jam, a variety of small packaging and pet food mildew sterilization preservation.
500-600kg Industrial fruits dehydrater (longan/Apples/red dat of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.
500-600kg Industrial fruits dehydrater (longan/Apples/red datfor herbs mainly use in drying and sterilizing for all kinds of tablets, pills, powder, oral liquid, medicine bottle, winebottle, Chinese- western medicine and medical gloves and garments.
500-600kg Industrial fruits dehydrater (longan/Apples/red date etc)
Product DescriptionUse for :
Dry vegetables lLD Radish, lettuce, pumpkin, carrots, spinach, cassava etc
Dry fruits lLD Apple, lemon, mango slices, dried longan, dried longan etc
Dry meat: Sausage, beef, duck, ham ect
Others it can dry noodle/ wooden /stick incense/herbs /floers ect.
Functions:
Heating drying
Cooling drying
Heating +dehumidify drying
Working principle:
heat pump dryer is use of reverse Carnot principle .With free air to absorb heat and transfer it to the drying chamber, drying room temperature to achieve improved, with the appropriate humidity and dehumidification equipment to achieve dry materials. heat pump dryer Compressor - heat exchangers - Chokes - heat sink (outside the machine) - Compressor and other devices constitute a refrigerant cycle system. Under the action of the compressor in the refrigerant circulating in the system flow, it is done in the gaseous booster compressor heating process (temperature up to 100 ℃), releasing it into the machine dry in room temperature air heated by the heat, while they have been and converted to liquid cooling flow, when it runs out machines, liquid absorbs heat quickly evaporates once again transformed into a gaseous state, while the temperature dropped to minus 20 ℃ --30 ℃, then the air around the heat sink will continuously transferring heat to the refrigerant. Refrigerant continuous cycle to achieve the heat in the air transport to the drying room heating room air temperature to achieve the purpose of dry material.
Key Features
1.heat pump dryer running cost just as 40% of oil dryer, 50% of coal burning boiler, 30% of electric boiler.Heat pump dehumidification drying method of the closed cycle, saving costs; no exhaust waste heat emissions, no noise pollution, environmental protection;
2.Using our patented technoloLD: circulating heating & dehumidification, broaden the application of a dehumidifier in industrial drying, drying performance better than ordinary heat pump dehumidification drying enerLD saving over 30%;
3.median and low temperature drying method(15-50°C/60°C/80°C),similar nature drying.
4.Drying process material no deformation, no cracking, no-discoloration,no deterioration, and no oxidation, thorough drying, after drying and rehydration, less loss of nutrients, the long storage period, more than any conventional drying equipment to more effectively protect the color of the dried material, smell, taste, individual
form and active ingredients;
5.adopt closed type circulating heating or cooling drying,suitable for inflammable and explosive materials, poisonous material,Pungent odor of materials,easily oxidized material etc;
6.installation and operation easily,just need connecting with drying chamber by wind pipe;
Technical Specificat
NEW TYPE heat pump dryer MODEL |
JK06RD |
|||
Suitable for drying chamber |
m3 |
20-30 |
||
Power supply |
V/PH/HZ |
380/3/50 |
||
Power input |
KW |
5.80 |
||
Running current |
A |
12.6 |
||
Auxiliary electric heater |
KW |
9.0 |
||
Heating capacity |
KW |
26.0 |
||
Cooling capacity |
KW |
20.0 |
||
Dehumidification amount |
L/H |
20 |
||
Max. hot air Temperature |
℃ |
75 |
||
Working ambient temperature |
℃ |
-10~45 |
||
Refrigerant |
KG |
Mixture type/4.3 |
||
Compressor |
Type |
Scroll |
||
Brand |
Copeland/Danfoss |
|||
Quantity |
1 |
|||
Noise |
dB(A) |
65 |
||
Fan motor for drying (recommend power input and qty) |
Power input/qty |
250W/unit |
||
Wind volume |
m3/H |
|||
Recommend fan motor qty |
8 |
|||
Heat regenerator size |
mm |
500*500*580 |
||
Fan motor for heat regenerator (dehumidify) |
Power input |
370W |
||
Wind volume |
2000m3/H |
|||
Size(mm) |
470*320*470 |
|||
Wind valve |
Power input |
6W |
||
OPEN |
Exchange fresh air |
|||
CLOSE |
Drying |
|||
Size(mm) |
630*560*120 |
|||
Fan motor for evaporator (1 units) |
Power input |
780W/unit |
||
Wind volume |
10500m3/H |
|||
Rotate speed |
1350R/Min |
|||
Hot air outlet |
mm |
650*1100 |
||
Hot air return inlet |
mm |
750*1100 |
||
Dimension (L*W*H) |
horizontal blowing type |
mm |
1720*1160*1280mm |
|
vertical blowing type |
MM |
2100*1080*1840 |
||
WeigLD |
Net weigLD |
Kg |
385 |
|
Gross weigLD |
420 |
|||
FOB LD |
|
|
||
|
Applications:
Our shipment: