The latest Research and Development full-automatic hydraulic rapeseed oil machine

The latest Research and Development full-automatic hydraulic rapeseed oil machine
Introduction of The latest Research and Development full-automatic hydraulic rapeseed oil machinelow-temperature-press (LP), high-temperature-press.
external processing, using teaseed as raw materials.
one can run Shandong Microwave Machinery Co.,Ltd.factory with Shandong Microwave Machinery Co.,Ltd. refining equipment.
one can sell The latest Research and Development full-automatic hydraulic rapeseed oil machine while pressing at the market.
Functions of The latest Research and Development full-automatic hydraulic rapeseed oil machine
(1) The latest Research and Development full-automatic hydraulic rapeseed oil machineRefining section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.
(2) Teaseeds oil machineryDecoloring section: used to remove off pigments, bleaching oils and grease dehydrate.
(3) Teaseeds oil machineryDeodorizing section: to remove off the odor components in oil.
(4) Teaseeds oil machineryDewax: used to remove off the wax in the oil, in order to get the high quality oil.
(5) The latest Research and Development full-automatic hydraulic rapeseed oil machineHeattransfer oil stove: supply each device production needing heat energy, temperature reach above 280°C.
(6) Teaseeds oil machinerySteam generator: produce the needing steam for de-odoring and distillation.
(7) The latest Research and Development full-automatic hydraulic rapeseed oil machineVacuum pump: supply needing vacuum for dehydrate, de-color, de-odor. Vacuum degree can reach above 755mm Hg.
(8) Teaseeds oil machineryPress filter: filter clay, filter out clear oil.
(9) The latest Research and Development full-automatic hydraulic rapeseed oil machineAir compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.

Preconditioning station based processing steps: cleaning, conditioning, broken, softening, rolling embryo, steaming and roasting and pre-press. Wherein the pretreatment of cottonseed to have lint, peel and other technology. Pretreatment Section of oil processing equipment is the most important part, but with different pre-processing machinery and equipment, and the different requirements of different end-oil production of raw materials and have different configurations and processes. Division I for different fuel pretreatment plant and process configuration is not the same, for example, the need for expanded rice bran pretreatment steps, the need for pre-processing of palm fruits to kill the yeast section, cottonseed pretreatment need to have lint process Wait.

LD grease mechanical pretreatment equipment advantages:
1, to reduce wear and tear on the follow-up equipment, improve environmental quality workshop;
2, improve equipment production, improve oil yield, to ensure maximum quality fat, meal and byproducts;
3, the lowest rate of fuel crushing, destructive for protein meals minimum.

Pretreatment Applicable oil: soybean, rice bran, sunflower, rapeseed, cottonseed, walnuts, corn germ, peanuts, copra, castor bean, palm kernel, palm nuts, sesame, olive, algae oil and the like.

Pretreatment capacity: 30-5000T / Day

Cleaning sieve

Destoner

Elevator&Conveyor

Cooking pot

Oil press

The main section of extraction plant: leaching systems, steaming off the system, evaporation system, condensate recovery system and eLDaust system. The main principle is to use a suitable solvent to feed embryo oil extracted, and then removing the solvent in the mixed oils. Leaching of our design to produce a mixture of oil does not contain any chemical solvents, and direct removal of eLDaust, environmentally friendly.

It includes oil extraction, wet meal toasting, miscella evaporation, solvent recovery, eLDaust gas recovery with paraffin and other processes.

1).Extraction section. Convey oilseeds flakes with scraper conveyor to extractor, make them contact with organic solvent fully through soak and spray to get miscella, miscella into miscella tank for removing solvent, and wet meal out of the bottom of extractor to desolventizer-toaster for solvent removal.

Rotocel extractor is typical extractor to extract oil with solvent.

2).Toasting section.Use DTDC to separate solvent out from wet meal to get dry meal without solvent for animal feeds, and solvent can be recycled through condensation.

DTDC desolventizer-toaster is used in this section.

3).Evaporation and steam-stripping section. Because of different boiling point,remove solvent from miscella to get crude soybean oil with No.1 long tube evaporator, No.2 long tube evaporator and steam-stripping column.

4).Solvent from meal toasting and evaporation and steam-stripping of miscella can be recycled through condensation.

5).ELDaust gas recovery section.Use water-bath type absorption tower to absorb and condense solvent gas in eLDaust gas then recycle it.

LD mechanical oil extraction process section features:
1, the use of vacuum evaporation, the oil is high, the resulting good meal quality;
2, extractor design capacity, help to improve productivity, increase efficiency and reduce costs;
3, the leaching system design can be freely adjusted depending on the material and the desired yield and process effect, simple and reliable;
4, absorbing the unique eLDaust system, environmental protection and efficient;
5, full of energy-saving design, multiple use of heat energy, saving the amount of steam, energy-saving and low consumption.

Section leaching field of application: pre-press cake, expeller cake machine, flakes, puffed material, all containing low oil.

Size: 20-5000T / D

Extractor

Desolventor

Evaporator&Striper

Condensor

Main Projects Scope:

30-5000T/D oilseeds pretreatment project

30-5000T/D oilseeds extraction project

5-1000T/D crude oil refining project

5-1000T/D crude oil fractionation project

Oil interesterification project

Oilseeds protein, phospholipid project

Natural pigment extraction project

Grain deep processing project

Typical Project:

30-1000T/D rice bran pretreatment, expanding, extraction project

30-600T/D rice bran oil refining project

150-1000T/D cottonseed dephenolizing protein

10-1000T/D palm fruit oil pressing project

10-500T/D Non acid method biodiesel production project

10-2000T/D corn deep processing project

Newest Technology:

1,Energy saving oil vacuum deodorization technology

2,Concentrated protein extraction technology

3,Mixed oil extraction technology

4,Mixed oil refining technology

5,Molecular distillation technology

6,Broken rice desaccharification technology

7,Continuous lignite extraction technology

Shandong Microwave Machinery Co.,Ltd.is a Teaseeds oil machinery factory specializing in the production of The latest Research and Development full-automatic hydraulic rapeseed oil machine, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Teaseeds oil machinerycustomers with design and services of 1-2000 tons The latest Research and Development full-automatic hydraulic rapeseed oil machine. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Teaseeds oil machineryover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Teaseeds oil machineryoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Teaseeds oil machineryequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.

Contact us:

Carrie-Sales manager

Shandong Microwave Machinery Co.,Ltd.

Web: www.epier.com

Email: sales10@ldfoodmachine.com

Skype:leaderfoodmachine10

Moblie:0086-15020017267(also WhatsApp)