pumpkin seeds LD
I. General Description
2.Type of Feeding:continuous
3.Type of Control:control panel
II. The Features of Design
a. Speed of Conveying belt is adjustable.
In the transmission system, it applies frequency-converting control of speed, worm gear reducer.
b. The conveyor belt is Teflon Belt,special for microwave.
c. The deviation of belt is adjusted with Hand-movement.
2. The body of the Tunnel
a.The body of the microwave tunnel is made of Stainless Steel. In side there is one set of humidity extraction system to extract the humidity after heating.
b. To be safe, there is Automatic Power-off device while open the door of the machine.
c. The protecting case of Magnetic-pipe and transformer is made of stainless steel. On top there is one set of Heat extraction system to extract the heat enerLD generated by
working of machine.
d.The frame of machine is made of Stainless Steel pipe ,others is made of cold-rolled sheet painted.
e.One set of infrared thermometric is installed at the outlet of the tunnel to measure the temperature.
3.The controlling system
a. On the outside panel there are frequency converting speed controller, emergency stop button, Start, Stop buttons,
b. All the controlling components will be installed into one controlling box, which is at the entrance of the machine.
c.Ordinary button control system,.
d.The microwave power can be adjusted by choosing in the display text.
e. Every microwave source is an independent unit.If one is broken, the machine will not be prevented from running.
f. Every magnetron has an overheating protection device.
4.Main technical parameters:
Power Supply: 380V±10% 50HZ±1% three-phase five-wire
Microwave output frequency:2450±50MHz
Microwave input apparent power:≤56KVA
Microwave output power:≥40KW
Microwave power adjustment range:0-40KW(adjustable)
Ambient temperature: -5-40°C
Relative humidity: 80%, Surrounding environment:no corrosive gas, conductive dust and explosive gas.
Overall dimension(L*W*H):about 10680*1440*1750mm
Transmission speed: 0-10 m/min(adjustable)
HeigLD of the inlet and outlet : 60 mm(can design according to customers' requirements)
Microwave leak:accord with a country GB10436-89 standards
Equipment safety: accord with GB-5226Electrical safety standard
accord with a country GB16798-1997 Food machinery health
Please note:Inlet/outlet orifice,conveyor belt size and overall dimension can be designed according to your requirements.
this equipment use the microwave theory , conveyor belt design.drying and roasting fast ,and continuly, easy to control. All of the machine adopt 304# stainless steel, it is stainless,hard, easy to clean. the conveyor use the teflon belt. This machine use 380V 3phrase 5line electricity power.