Product Application of Canola/Rapeseed Oil Plant:
Canola/Rapeseed Oil Plant is an advanced oil press machine in edible oil market. It is used for both cold and hot oil extrusion process from a wide range of oil plants such as peanuts,rapeseed,cotton seeds and copra and so on. Integrated screw oil press machine enjoys wide popularity in small and large scale oil pressing plants because Canola/Rapeseed Oil Plant can not only press oil but also filter oil by vacuum filtering device, thus saves cooking oil extracting time & cost and simplifies oil pressing.
Canola/Rapeseed Oil Plant operating principle:
When Canola/Rapeseed Oil Plant is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.Under hightemperature condition in the chamber,there is quite strong friction among press screw,chamber and the oil materials.On the other hand, root diameter of the pressing screw carries larger from one end to the other.Hence when rotating, the thread not only pushes particles moving forwards but also turns them outwards as well.Meanwhile, particles adjacent the screw will rotate along with screw’s rotating,causing every particle inside the chamber to possess different speed.Therefore, relative movement among particles creates neat which is necessary during manufacturing because of helping protein change property, damage colloid, increase plasticity, decrease oil’s elasticity, resulting in high oil.
Main Features of biodisel oil machine:
1) Using vacuum filter,biodisel oil machine is able to simply filter the crude oil after pressing.
2)biodisel oil machine will labor and electricity saving.Screw oil press of Canola/Rapeseed Oil Plant saves 60% labor for equal output, and one or two people are able to operate independently.
3) biodisel oil machine have high oil yield and pure oil.
4) Canola/Rapeseed Oil Plant covering little space.An area of 10-20m*m workshop is enough, thus it is suitable for small and medium size oil extruding workshops or professional oil mills.
5)Canola/Rapeseed Oil Plant is widely applied to press sesame, walnut kernels, kiwi seeds, alomonds, etc.
Canola/Rapeseed Oil Plant construction features:
biodisel oil machine is mainly composed of 7 major parts of screw axis, press cage,feed mechanism,cake yielding mechanism.transmission system, electric control part and vacuum filter part.All the parts of biodisel oil machine are assembled on the frame and screwed as a whole.
Machine Parts of Canola/Rapeseed Oil Plant
Name:Sqeezing chamber
Original: China
With the constant feeding and screw shaft rotating, the space between the rings and the pressing screws is smaller and smaller and squeezes tightly.Edible oil flows to oil receiving plate and cakes are discharged out.
Main Features of Canola/Rapeseed Oil Plant
Name: Filter cartridge
Original: China
The crude oil through thr filter cartridge, then you get get cleaning oil.
Machine Parts of Canola/Rapeseed Oil Plant
Name: Control system
Integrated screw oil press is composed of the following parts: electric controller, heating and pressing part, adjusting part, conveying part and vacuum filtering device.
Main Features of Canola/Rapeseed Oil Plant
Name: Adjust bolt
Original: China
Through operate the adjust bolt, you can get more oil from oil seeds
Specifications
Biodiesel MachineSpecification:5~100T/D
Patent No.ZL200920089138.8
Meets European Union Standards
Jinan LD Cereals&Oil Machinery Engineering Co.,Ltd won "TOP 10 Cereals&Oil Machinery Brand in China" in 2011,which is a professional manufacturer in set of oil machine for 22 years.
Biodiesel Machine
Specification:5~100T/D(daily/24hours process capacity)
This Machine makes bio-oil into biodiesel,whicn is novel green fuel used for chemical industry field.Bio-oil can be plant oil,animal oil or high acid value waste oil.
This set of biodiesel equipment contains the international advanced pre-processing section,esterification process and distillation process,and it meets the European Union Standards.We have obtained patent which patent No. is ZL200920089138.8.
Production steps:
1.Preprocessing section of bio-oil: when heated to 65~70°c,bio-oil is leached to remove impurities.
2.Drying section:bio-oil without impurities is dehydrated and dried.
3.First esterification reaction:adding bio-oil dehydrated to methanol including 3% sulfuric acid,first esterification reaction starts,and it will take 1.5~2.5 hours.
4.Second esterification reaction:this esterification reaction will take 9~12 hours.
5.Vacuum drying section: Second esterification reactants are dried with vacuum,removing moisture,reducing water content below 3%.
6.Distillation section: with vacuum state,section esterification reactants after vacuum drying section are heated to 220°c,biodiesel forms by steaming.Then cooling biodiesel to be liquid ,the liquid biodiesel is just finished biodiesel.
7.Methanol fine-distillation:after biodiesel is isolated,the remaining methanol liquid is distilled to form methanol.Cooled methanol can be reused.
Equipment advantages:
1.Stable process performance
2.Simple operation
3.Small investment of equipment
4.High conversion rate(up to 85%)
Featurers:
1.Good driving performance for low-temperature motor,cooling point can reach -10°c without adding agent;
2.Good lubrication performance ensures low wearing rate of oil spraying pump,engine tank and rods;
3.As flash point of biodiesel is higher than mineral diesel,biodiesel does not belong to dangerous goods;
4.Sulfur content is low,small emission;
5.low residual combustion char(0.02%),i.e. microparticles content of waste gags is low;
6.Damage of waste gas after combustion is lower than that of mineral diesel;
7.High biodecomposition rate is favorable for environment protection.
Pls contact us to learn more about us and our equipment at http://hnhtly.en.alibaba.com or call me at 0086-13203730061
| Quality and Service Commitment | |
|
Our company always put the interests of customers and product quality to the first place,and always adhere to the"no best, only better" as our purpose. We will be commitment to provide high quality products with perfect site services and after-sales service. Now the specific commitments are as follows: | |
| 1. | Ensure to timely provide complete sets of equipment and accessories. |
| 2. | Ensure that one-time installation debugging acceptance. |
| 3. | To provide high quality material with preferential price. |
| 4. | Priority to provide customer our new craftworks and products. |
| 5. | Free training technological operator to ensure the trained staff can operation independently. |
| 6. | In the installation process,we will appoint a installation supervision staff on the spot. |
| 7. | we will offer an experienced project manager, organize a good installation team for the work of field installation debugging. |
| 8. |
After the equipment field assembly and installation, we will be also responsible for the single equipment debugging, online debugging and Feeding trial operation, to ensure that equipments can normal operate in full load conditions. We will provide all kinds of information and records according to the requirements of the bid. The qualified completion files will be provided to customers according to their requirements within one month after acceptance. |
| 9. |
In the warranty period, all because of the quality of products has caused the damage or failure of equipment, suppliers will take the responsibility for the free repair and replacing spare part. Due to the damage caused by the customer,we only charge material costs for repair and replacement. After the receipt of customers notice,we will suggests the method to solve problem within six hours,or send specialist to the site to solve the problem within twenty four hours. |
Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of biodisel oil machine.Shandong Leader Machinery Co.,Ltd. manufacture biodisel oil machine making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Canola/Rapeseed Oil Plant for you reference,such as biodisel oil machine ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Canola/Rapeseed Oil Plant.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:sales2@ldfoodmachine.com,Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for biodisel oil machine, inform us raw material you want to use for biodisel oil machine,and specific requirements for biodisel oil machine.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Canola/Rapeseed Oil Plant.