Film Blowing Microwave Heating Machine
Microwave heating machine is to heat and melt plastic particles and then blow them into thin films. There are many kinds of film blowing machines, such as PE, POF and so on. Some people use recycled plastic bags to make particles, which are generally called used materials. When making particles, they are usually grey. When making bags, they usually add pigments to make bags, which are uneven in colour, brittle and fragile, and low in price. Chinese style.Although it is a recycled plastic bag, it is generally a waste bag in the process of bag making, which is quite different from the general sense of waste plastic.
Film blowing microwave heating machine produces film for all kinds of high-grade film packaging. Because of its good barrier, fresh-keeping, moisture-proof, frost-proof, oxygen-proof and oil-proof, the film can be widely used in light and heavy packaging. Such as all kinds of fresh fruits, meat products, pickles, fresh milk, liquid drinks, medical supplies and so on. But it does not use waste plastics as raw materials. It uses plastic granules as raw materials.
Instructions for Use Attention
1. Operators should not stand in front of the machine in order to avoid accidental injuries and operators. When the film blower feeds, it is strictly prevented that the hard materials with metal impurities and operating tools which damage the machine fall into the barrel. Never wear gloves when operating a rotating machine to prevent involvement. Check and improve the lubricating oil in the reducer and air compressor, and check the lubrication of the mechanical transmission parts. Avoid damaging the machine and making noise by dry operation.
2.When the die outlet is uniform and uniform, gloves can be worn to pull the tube blank slowly. At the same time, the end of the tube blank is closed and the intake valve is opened slightly, so that a small amount of compressed air is put into the core hole, and then the foam holder and herringbone plate are carefully guided, and the drawing roll and guide roll are inserted into the drawing roll and coiling up.Within the range of film-forming conditions, increasing the forming temperature, cooling air temperature and blowing ratio will increase the film turbidity and decrease the gloss, and vice versa.
3. When switching on, it is necessary to check whether the power supply wiring is disconnected or leakage; check whether the instrument is damaged abnormally. Make sure all parts are safe and normal before starting, so as not to affect production and cause accidents.
The new material is blown out with brand-new particles. The color is uniform, clean and the bag is well stretched. Some people use recycled plastic bags to make particles. These particles are generally called used materials. When they are made into particles, they are usually grey. When they are made into bags, they usually need to add pigments to make bags. The coloring of bags is uneven, brittle and fragile, and the price is low. Although it is a recycled plastic bag, it is generally a waste bag in the process of bag making, which is quite different from the general sense of waste plastic. The film blower produces film which is suitable for all kinds of high-grade film packaging. Because of its good barrier, fresh-keeping, moisture-proof, frost-proof, oxygen-proof and oil-proof, the film can be widely used in light and heavy packaging. Such as all kinds of fresh fruits, meat products, pickles, fresh milk, liquid drinks, medical supplies and so on.